VS MEDIAGONE 500, Руководство по эксплуатации

Страница: 6 / 15

VS Security Products LTD ZZ001234, ZZ001235 Page 6 of 15
3.2 Hardware Installation
3.2.1 Unpacking
The MediaGone 500 Trolley is shipped inside a cardboard packing case (separately from the MediaGone 500). Unpack
the Trolley carefully by disassembling the packing case and inspect it for signs of physical damage. If damage is
apparent, a claim should be filed with the carrier immediately.
3.2.2 Fit the Door
Locate the door inside the back of the trolley. Fit the door by screwing the hinges into the front of the trolley using the
screws and Allen key provided. (See figure 1).
3.2.3 Place the MediaGone on the Trolley
Carefully lift the MediaGone onto the trolley lifting only using the 4 handles 2 on each side. Place the 4 feet within the
dips on the trolley, the front of the MediaGone needs to be on same side as the clear door on the trolley.
3.2.4 Connect the Trolley
On the front right hand side of the trolley, be sure to connect the cable between the MediaGone and the trolley. (See
Figure 2)
3.2.5 Modify the Drawer
When using MediaGone 500 with the trolley the waste drawer will need to be modified as described below to allow the
shredded material to drop into the trolley waste basket.
1. Undo the 4 nylocs, shown in the figure 3, and remove the blanking late from the bottom of the drawer.
Door Hinges
Cable
Figure 1
Figure 2
Figure 3