14
(1)
(2)
(5)
(6)
(7)
(7)
(6)
(8)
(1)
(2)
(5)
(5)
(5)
(4)
(4)
6. Mounting chair-suspension runners
Uno-M-Step 22405-22413
UnoBean-Step 01468
Turn the table top over and lay on a clean assembly surface
(e.g. protective cover, etc.).
-
LIGNOdur 22405, 22408, 22409, 22411
Position the chair-suspension runners
(1)
over the pre-
drilled holes in the table top (distance
(2)
from the user
side
(4)
is 50 mm). Here the folded edges
(5)
of the
runner pairs always point outwards. The size of the seat
shell can be adjusted via the elongated holes in the
chair-suspension runners (outwards < --- > large seat
shell
(6)
/inwards >---< small seat shell
(7)
). Screw on
each chair-suspension runner with three M6x12 mm
slotted pan-head screws.
-
LIGNOdur 22406, 22407, 22410, 22412, 22413,
01468
Position the chair-suspension runners
(1)
over the de-
signated sleeves in the table top (distance
(2)
from the
user side
(4)
is 50 mm or 76/85 mm for model 01468).
Here the folded edges
(5)
of the runner pairs always
point outwards. The size of the seat shell can be adjusted
via the elongated holes in the chair-suspension runners
(outwards < --- > large seat shell
(6)
/inwards >---<
small seat shell
(7)
). Screw on each chair-suspension
runner with three M6x15 mm slotted pan-head screws.
Caution!
In conjunction with the chair suspension do
not mount a top support
(8)
on the models 22408 and
22409 (one-seater).