NOTE:
If battery power is weak, wait about 2 minutes before
switching the trimmer on.
NB – NEVER USE THE TRIMMER IN CORDED OPERATION IF YOU
INTEND TO USE THE TRIMMER IN THE SHOWER OR UNDER RUNNING
WATER, AS THIS WILL CAUSE INJURY.
CHANGING THE ATTACHMENTS
1. Before changing any of the attachments, ensure that the
appliance is switched off.
2. To remove an attachment head, using both hands, hold the
handle of the appliance so that the back of the trimmer is facing
you and both your thumbs are positioned on the bottom of the
attachment. Push the attachment up until it un-clicks, then pull
the head back and away from the handle.
3. To attach an attachment head, place the attachment head over
the top of the handle, ensuring that the plastic lug is positioned
at the back. Slide the attachment head down until it clicks into
place.