CLEANING & MAINTENANCE
To maintain optimum performance, the appliance should be cleaned
after each use:
• Remove the comb guide after use. Rinse the comb guide under
running water and dry thoroughly before storage or use.
• The cutting head of the trimmer is detachable for easy cleaning.
Hold the trimmer pointing away from you with the cutters pointing
upwards. Position your thumb underneath the cutter and push
upwards to take the cutting head off.
• Using the cleaning brush remove any remaining hair from the trimmer
blades.
• To replace the cutting head, align the lug on the rear of the head with
the corresponding groove on the back of the trimmer, and snap down
into place.
• When used regularly the clipper blades will not need to be oiled.
However, if the appliance has not been used for a prolonged period
of time it is advised to oil the blades before use. After cleaning,
switch the appliance on and oil the blades using a few drops of the
lubricating oil supplied. Only use the lubricating oil supplied with the
appliance as this is specifically formulated and does not evaporate
or slow the blades.
