19mm Curling Tong: for creating defi ned structured curls
1. Attach the 19mm tong attachment to the
power handle – please see ‘Attaching the
attachments and securing the locking ring’
and select desired temperature and turn
appliance on.
2. Section your hair starting from the back
bottom half of your head then continue around the side and
front section.
3. Separate small sections of hair and place the ends of one
section under the clamping tong.
4. Holding at a vertical angle, rotate the barrel by rolling the
hair up towards the roots. Try not to overlap the hair on the
tong. Hold for 5-10 seconds or for maximum results hold for
longer (this can be held for a longer or shorter period of
time depending on your hair type and desired style).
5. You can determine the size and tightness of the curl
depending on how tightly you roll the hair up the tong.
6. To prevent frizzy hair, make sure your hair is placed properly
under the clamp in the desired direction for the curl.
7. Release the curl by pressing the lever to open the clamp,
then slide the barrel out.
8. Repeat until the desired amount of curls has been achieved.
9. To “set” the curl, wait until your hair has cooled before
brushing or combing it through.
Spiral Sleeve Attachment: for creating modern drop curls
1. Attach the 19mm tong attachment to the
power handle, then attach the spiral sleeve
attachment by sliding it over the tong under
the spoon (smaller lever/clamp), then select
desired temperature and turn appliance on.
2. NOTE: TONG MUST BE COOL WHEN
ATTACHING AND REMOVING THE SPIRAL SLEEVE ATTACHMENT.
3. Take a 2-3cm section of hair and place the ends of one
section under the spoon (smaller lever/clamp) and roll it
carefully around the spiral. Hold for about 10 seconds and
unroll gently.
4. Repeat until the desired amount of curls has been achieved.
5. Allow hair to cool before brushing or combing through.
6. Allow tong to cool before removing attachment and
storing.
Brush Sleeve Attachment: for creating soft waves and curls
1. Attach the 19mm tong attachment to the
power handle, then attach the brush sleeve
attachment by sliding it over the tong under
the spoon (smaller lever/clamp), then select
desired temperature and turn appliance on.
2. NOTE: TONG MUST BE COOL WHEN
ATTACHING AND REMOVING THE BRUSH SLEEVE ATTACHMENT.
3. Take a 2-3cm section of hair and place the ends of one
section under the spoon (smaller lever/clamp) and roll it
carefully around the spiral hold for about 10 seconds and
unroll gently.
4. Repeat until the desired amount of curls has been achieved.
5. Allow hair to cool before brushing or combing through.
6. Allow tong to cool before removing attachment and storing.
Styling Tip
For professional results, comb a small amount of mousse or
styling gel through the hair before drying and styling.
instruction
booklet
waves & curls salon styler
VS2090A
How does the Ionic feature work?
Ionic Conditioning Technology™ -
Many aspects of modern
living, including air conditioning, contact with man made fi bres
and air pollution, add to the buildup of static electricity in the
hair. Even brushing and towel-drying the hair can increase
these levels. This static charge causes the scales, or cuticle of
the hair to push each other apart, resulting in a rough hair
surface where the hairs cannot lie smoothly against each other.
Consequently, hair may have a dull appearance. High levels of
static charge cause hair to become ‘fl yaway’ and diffi cult to
style. This technology emits a stream of negative ions which act
to neutralize the static charge (positive ions), leaving hair silky
and shiny with reduced frizz.
What is Tourmaline Technology?
Tourmaline-Ceramic Technology™ -
Hair damage is minimized,
as the ceramic heat delivers even heat distribution from the
styling appliance, coating harmful and damaging hotspots.
Ceramic heat is a gentle, faster styling tool that retains heat
longer vs non-ceramic heat. Tourmaline is a semiprecious
crystal, which is a natural coating of negative ions and
far-infrared (FIR) rays. The tourmaline-ceramic coating
creates radiant heat to effi ciently and safely dry the hair
from the inside out. When in contact with wet/damp hair,
tourmaline works to ionize and alkalise moisture, and provides
antibacterial and deodorant qualities.
User Maintenance
Your styler is designed for household use and is virtually
maintenance-free. No lubrication is needed. Keep all vents
and openings clear of lint and other debris. If cleaning
becomes necessary, disconnect the appliance from the power
outlet. Allow the straightener to cool and wipe exterior with
a cloth. If any abnormal condition occurs, allow to cool and
return to your place of purchase.
Limited Two Year Warranty
Conair Australia Pty Ltd. will repair or replace (at our option)
your appliance free of charge for twenty-four months
from the date of purchase if the appliance is defective in
workmanship or materials. This warranty is an additional
benefi t and does not affect your legal rights. To obtain service
under this warranty, please fi ll in and return the Warranty
Registration as instructed.
VS2090A
IB-7319
®
Vidal Sassoon and related logos are trademarks of
The Procter & Gamble Company used under licence by Conair
©2008 Conair Corporation USA, 1 Cummings Point Rd,
Stamford, Connecticut, 06902 USA
Conair Australia Pty Ltd
Suites 20 and 21,
7 Narabang Way, Belrose NSW 2085
Customer Service Hotline (Australia): 1800 650 263
Customer Service e-mail: [email protected]
Conair New Zealand Ltd.,
PO Box 251159, Pakuranga, Auckland, 1706, New Zealand
Customer Service Hotline (New Zealand): 0800 266 247
VS2090A IB.indd 4-6
VS2090A IB.indd 4-6
9/29/08 9:01:57 AM
9/29/08 9:01:57 AM
