IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are
present, basic safety instructions should always be followed,
including the following:
Polythene bags over product or package may be dangerous.
To avoid danger of suffocation, keep this wrapper away from
babies and children. This bag is not a toy.
DANGER:
Unplug unit when not in use. All appliances are
electrically live even when switched off.
WARNING:
This appliance must not be taken into a
bathroom.
• Do not immerse in water or other liquids. Do not use
in the bath, or near basins or other vessels containing water.
• Do not reach for an appliance that has fallen into water.
Unplug immediately.
• Take care to avoid contact between the hot surfaces of the
unit and the skin, paying particular attention to the face,
neck and hands.
• This appliance is not intended for use by young children or
infi rm persons without supervision. Young children should
be supervised to ensure they do not play with the appliance.
IMPORTANT:
Always unplug the appliance when not in use or
before cleaning. Do not leave unattended when plugged in or
switched on. Do not place on any heat-sensitive surface and
always allow to cool before storing away.
• Do not use any attachments other than those supplied by
Conair Australia Pty Ltd.
• Use this appliance only for its intended use as described
within this instruction booklet.
• This appliance is not intended for commercial use.
• Never drop or insert any object into an opening or hose.
• Never block the openings of the appliance or place on a soft
surface such as a bed or couch, where the openings may be
blocked. Keep the openings free of lint and other debris.
• Do not use outdoors or operate where aerosol (spray)
products are being used or where oxygen is being
administered.
• Keep the cord away from heated surfaces.
• Do not use an extension cord with this appliance.
• Do not use this appliance if the supply cord is damaged.
In the event of damage, discontinue use immediately and
contact your dealer for instructions on returning it for
examination or exchange.
• After use do not wrap the cord around the appliance as in
time this may cause the cord to fracture. Coil cord loosely by
the side of the appliance in storage.
• Always ensure that the voltage to be used corresponds to
the voltage marked on the unit.
• For additional protection, the installation of a residual
current device (RCD) with a rated operating current not
exceeding 30mA is advisable in the electrical current circuit
supplying the bathroom. Ask your installer for advice.
Waves & Curls Salon Styler
VS Sassoon’s Waves & Curls Salon Styler is an essential styling
kit that provides versatility for creating:
• Deep tousled waves for a natural look
• Defi ned structured curls
• Modern drop curls
• Soft waves and curls
Featuring tourmaline-ceramic technology™ and ionic
conditioning technology™ to help create salon perfect hair by
locking in moisture to reduce frizzies and fl yaways.
How to use your Waves & Curls Salon Styler
Styling curls and waves is now made even easier, thanks to the
versatility of the Waves & Curls Salon Styler.
1. A plastic cover has been placed over the plug to protect it
from damage. Remove the plastic cover from the plug before
use.
2. Ensure hair is clean and completely dry before using the
appliance.
3. Comb through hair to prevent knots and tangles and then
divide hair into equal sections.
4. Choose the attachment that you wish to use and attach to
the handle – please see ‘Attaching the attachments and
securing the locking ring’ below.
5. Lower the heat rest stand and place styler on a fl at level
surface.
6. Plug the appliance into a suitable power outlet and select
your required temperature setting, please see ‘How to use
the 25 variable temperature settings’.
7. Press the ‘l’ button. The red LED light will illuminate and
blink.
8. When the tong has reached the desired temperature, the
red LED light will stop blinking and solid color.
9. Style sections of your hair until completed.
10. To turn the appliance off press the ‘0’ switch. The red LED
indicator light will turn off. Allow appliance to cool before
removing attachments and storing.
NB: This appliance has a safety automatic shut-off system,
which will automatically turn the appliance off if left switched
on for 72 minutes. If this occurs, please wait for appliance to
cool. Switch the appliance off unplug the cord, If you still need
use this appliance. just press the “I” button.
• tourmaline- ceramic
technology™
• ionic conditioning
technology™
• ultimate 4-in-1 styling
• triple barreled styler
• 19mm tong
• 19mm brush sleeve
attachment
• 19mm spiral brush
attachment
• fold-out heat rest stand
• 180°C
• 25 variable heat settings
• LED indicator light
• automatic shut-off system
– 72 minutes
• carry case
Attaching the attachments and securing the locking ring
1. Select the required attachment.
2. Ensure the locking ring is unlocked before setting the
attachment.
3. Insert the metal rods on the attachments into the body of
the appliance by lining them up with the corresponding
openings. Ensure it is secure.
4. Lock it into place by turning the locking ring anti-clockwise
towards the unlock symbol.
5. Always allow the unit to cool before removing the
attachment.
6. To remove the attachment, turn the locking ring clockwise,
towards the unlock symbol then fi rmly pull the attachment
off.
How to use the 25 variable temperature settings
The 25 variable temperature settings provide variable heat for
many different hair types. These settings allow you to choose the
required temperature setting according to your particular need.
NB: The heat up time will vary depending on which
temperature setting you select. It is suggested to use the lower
heat settings when using the appliance for the fi rst time.
The Attachments
Triple Barreled Styler: creates deep tousled waves for a
natural look
1. Attach the triple wave barrel to the
power handle – please see ‘Attaching the
attachments and securing the locking ring’
and select desired temperature and turn
appliance on.
2. Section your hair starting from the back
bottom half of your head then continue around the side and
front section.
3. Take a section of hair about 5cm wide and pull taut. Press
the lever and open the triple barreled styler and place the
hair section inside. Close by clamping the styler over the
section of hair for about 5-10 seconds (depending on your
hair type and the desired style), then unclamp the styler
using the lever.
4. Continue this until the desired amount of wave has been
achieved.
5. For continuous deep waves place the tong on the last wave
from the previous section and repeat above. Or alternatively
start from the root and work your way down in the same
motion.
6. Loosen waves with your fi ngertips; it is advised not to use a
brush as this can fl atten out the waves.
Temperature Setting Guide
Variable Temperature
Hair Type
Control Settings
1-10 (Low)
Fine, bleached or damaged hair
11-20 (Medium)
Normal coloured or wavy hair
21-25 (High)
Thick or curly hair
VS2090A IB.indd 1-3
VS2090A IB.indd 1-3
9/29/08 9:01:55 AM
9/29/08 9:01:55 AM
