VS Sassoon THE CREW CUT ELITE, Советы по использованию инструментов

Страница: 19 / 32

19
THE CREW CUT ELITE / TOOL TIPS
SELECTING A CUTTING LENGTH
The finishing trimmer attachment can be used without comb guides to trim and tidy hairs around
ears, neckline and side burns. It also includes 3 x jawline comb guides to blend side burns if you
have a short beard.
GRADE #1 4.5mm
GRADE #2 3.5mm
GRADE #3 2.5mm
ATTACHING THE FINISHING TRIMMER ATTACHMENT
1. Before attaching the finishing trimmer attachment, make sure your
power handle is switched off.
2. Remove any comb guides attached to your finishing trimmer attachment.
3. To attach the finishing trimmer attachment align the driving pin with the
centre of the base of finishing trimmer attachment (Fig. 1). Then, holding
the finishing trimmer attachment, push the head down onto the power
handle until you hear a click.
4. To remove the finishing trimmer attachment, hold the power handle with one hand, while
holding the finishing trimmer attachment with the other hand. Pull the finishing trimmer
attachment back and away from the front of the power handle.
ATTACHING THE COMB GUIDE
To attach the comb guide, slide the comb guide onto the front of the finishing trimmer
attachment until the comb guide can be pushed no further.
REMOVING THE COMB GUIDE
To remove the comb guide, push the guide forward and off the finishing trimmer attachment.
PUSH
ON
OFF
PUSH
DOWN
PUSH
DOWN
Fig. 1