VS Sassoon THE BEARD BUDDY VSM703A, Советы по использованию инструментов

Страница: 9 / 16

9
THE BEARD BUDDY / TOOL TIPS
USING THE 6 POSITION COMB GUIDE
The Beard Buddy comes with a 6 position comb guide (4mm to 18mm) for crafting a
short stubble look, or keeping your beard in top shape.
Use the shortest setting for maintaining a short stubble look, or use the longest
setting for maintaining a longer beard.
ATTACHING THE 6 POSITION COMB GUIDE +
ADJUSTING THE SETTINGS
To attach the comb guide, ensure that the trimmer is switched off.
Slide the comb guide over the top of the 30mm trimming blade and with your thumb,
slide the comb guide up and down until it clicks into the desired cutting length.
REMOVING THE COMB GUIDE
To remove the comb guide, ensure the appliance is switched off.
With your thumb, slide the comb guide up until it is fully released from the head of the
30mm trimming blade. If you want to completely remove hair, use the 30mm trimming
blade without the comb guide.
3 POSITION TAPER CONTROL
The taper control provides 3 precision settings for blending layers & a precise,
close cut, everytime - 0.5mm, 1mm & 1.5mm.
To increase the cutting length, slide the switch down.
To reduce the cutting length, slide the switch up.
CHANGING THE TRIMMING BLADES
To remove a trimming blade, place both of your thumbs at the top of the trimmer
and push the blade head away from you until it comes away from the trimmer power
handle.
CAUTION: WHEN REMOVING THE BLADE OR COMB
GUIDE ATTACHMENT, BE CAREFUL NOT TO CUT YOUR
FINGERS AS THE BLADES ARE SHARP.