VS Sassoon Frizz Defense VS2735GA, Инструкция пользователя

Страница: 12 / 20

BRUSH ‘N’ STYLE
12
CLEANING & MAINTENANCE
Blocked or clogged air intake vents will cause the dryer to overheat.
The rear filter should be checked & cleaned on a regular basis - to help
maintain optimum performance & prevent overheating.
Unplug the styler & allow to cool completely before cleaning or storing.
• Holding the handle of your styler firmly, click down to open the rear filter
at the base of the styler.
• Using a soft brush, clean any hair & other debris that may build up in
the filter.
• Replace the rear filter by pushing back into position
If overheating occurs, an automatic safety device will shut the dryer or
the heat off to prevent damage or personal injury. If the dryer or heat
turns off, unplug the cord & allow the dryer to cool for 15 minutes before
restarting. Make sure the air vents are 100% clean .