VS Sassoon CLASSIC MULTI CURLS, Инструкция пользователя

Страница: 9 / 20

CLASSIC MULTI CURLS
9
OPERATING INSTRUCTIONS
Wash, condition & dry your hair as normal.
Ensure your hair is combed through & tangle-free. Hair should be
clean & dry, or slightly damp when using rollers - never wet.
NOTE – The firmness of the curl is determined by several factors:
heat up time, best roller selection & the length of time the roller is
left in the hair.
Small rollers: Use on short hair to create fullness and a tight curl.
Tight curls can be used at the nape of the neck, and used to frame
your face.
Medium rollers: Use on medium to long hair to create a looser curl,
yet bouncy & full.
Large rollers: Use on medium to long hair to create voluptuous curls
with full, extra volume.
1. Plug your hair rollers into a 240V~ suitable power outlet & place
on a heat protective, flat level surface.
2. Once plugged in, switch on the on/off switch to the I position.
The red indicator light will then alight to indicate that the rollers
are heating up.
Allow rollers to heat with the lid closed, as this will provide the
fastest, most efficient heat up. The rollers will be heated & ready
to use between 20-30 minutes. Once the rollers are heated, & the
red dot on the centre roller has turned white, you can begin styling
your hair.
3. Select the desired roller size, divide your hair into equal sections
& comb section once more before curling.
4. Take one section of hair at a time & place the ends of the hair on
the roller then wind up towards the scalp, ensuring the ends of
the hair section are tightly secured around the roller. Continue to
roll hair firmly & secure by using a super clip or metal clip.
5. To remove a roller from your hair, hold the roller in one hand
while removing the clip with the other. Gently drop the roller out