SERVICE
Vossloh-Schwabe Deutschland GmbH
Stuttgarter Straße 61/1
D-73614 Schorndorf, Germany
Phone: +49 (0)7181 8002-0
For further information please visit our website: www.vossloh-schwabe.com
Bluetooth
®
wireless technology
The Bluetooth
®
word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and
any use of such marks by Vossloh-Schwabe is under license. Other trademarks and trade names are
those of their respective owners.
We, Vossloh-Schwabe Deutschland GmbH, herewith confirm that these devices comply with the basic
requirements of the directive 2014/53/EU and other relevant directives. The entire text of the declaration
of conformity can be obtained from the following address: www.vossloh-schwabe.com
Power supply
This product requires a power supply of 230 V AC. In addition, the product is wide voltage capable
(100–240 V AC). A PoE (Power over Ethernet) supply is possible with this product.
Assembly
• Mounting only permissible in dry interior rooms
• Conductor cross-section on primary side 0.5–1.5 mm² for rigid or flexible cables
• Ambient temperature from 0–45 °C
• If the device is mounted on the wall or ceiling a smooth surface for mounting shall be considered. The
used screws shall have a minimum of 8 mm in length.
Setup and operation
• The Blu2Light devices have to be configured with the LiNA Connect app.
• For the exact procedure for the configuration of the devices please refer to the instructions in the LiNA
Connect app or in the corresponding documentation.
• An Apple iPad is required for setup, it is not included in the scope of delivery.
• For information on the iOS and Android operating systems that can currently be used, refer to the
LiNA Connect/ LiNA Touch manual:
Important note:
Before installation, please also refer to the applicable device data sheet and the Blu2Light system data
sheet. Make sure that the Bluetooth radio signal can propagate freely according to the specifications.
Technical Notes
Blu2Light LAN Gateway
Ref. No.: 187055
Communication:
Blu2Light mesh network / Ethernet protocol (LAN)
Frequency range:
2402–2480 MHz
Power supply:
230 V AC
Power consumption stand-by / operation:
< 4 W
Ambient temperature t
a
:
0–45 °C
Degree of protection:
IP20
Protection class:
II
Dimensions (LxWxH):
195 x 102 x 38 mm
Casing:
Plastics, white
Weight:
375 g
Push-in terminals for lead cross section:
0.5–1.5 mm² (a different minimum conductor cross-section
of 0,75 mm² in some countries has to be taken into
account)
PD:
Powered devices
PSE:
Power sourcing equipment
Schaltplan / Wiring diagram
Standard
Daisy-Chain
PoE
L
N
PE
LAN (PoE-PD)
LAN (PoE-PD)
LAN (PoE-PsE)
LAN (PoE-PsE)
N
N
L
L
PE
PE
LED1
LED1
LED2
LED2
B2L LAN-
Gateway 2
B2L LAN-
Gateway 1
Server
Switch
L
N
PE
LAN (PoE-PD)
LAN (PoE-PD)
LAN (PoE-PsE)
LAN (PoE-PsE)
N
N
L
L
PE
PE
LED1
LED1
LED2
LED2
B2L LAN-
Gateway 2
B2L LAN-
Gateway 1
Server
Switch
L
N
PE
LAN (PoE-PD)
LAN (PoE-PD)
LAN (PoE-PsE)
LAN (PoE-PsE)
N
N
L
L
PE
PE
LED1
LED1
LED2
LED2
B2L LAN-
Gateway 2
B2L LAN-
Gateway 1
Server
Switch
