VRS Fleet Products CJV1 Pro HD, Руководство пользователя

Страница: 5 / 24

Please follow the below guidelines to prevent damages
to camera and SD card.
- For first time use, format a new SD card on PC.
- Record video for 5 to 10 seconds after the power supply cable is unplugged.
- During extreme weather conditions, camera should be sheltered from direct sunlight.
- Do not try to control the product while driving. Please make sure to control
the product in safe environments.
- Do not touch the SD card and/or camera with oily or wet hands.
- Do not insert impurities into the SD card slot.
- Do not use water or harsh chemicals when cleaning the camera.
Only use a soft and dry cloth for cleaning.
- If CJV1-Pro HD is physically damaged or disconnected from power supply,
the camera can not record and/or save data.
- Do not use dark tinting on vehicle windows and remove all impurities,
otherwise video recording can be distrusted and result in degraded recording quality.
- Check video recordings to ensure camera angle is properly adjusted
when changing the location of the camera.
- Contact your sales representative immediately if there are any product malfunctions.
- Do not apply violent force to camera, as it can cause damage to product.
- Product will operate normally once installation in completed. Changes to the location
of camera can cause product malfunction. Camera must be firmly placed on windshield.
Do not apply violent force while changing the location of the camera.
- Only use SD cards that are supplied or recommended by VRS Fleet Products.
The use of other SD cards can cause camera and SD card malfunctions.
- Do not disconnect the SD card from camera, turn off camera or turn off the vehicle during
firmware upgrades, otherwise it can cause SD card to malfunction or the lose of serious data.
- Motion detection function can cause camera to malfunction by changes
in environment, weather or climate.
Caution 3
How to use