Installation
Valve Location
Spot is designed for quick-clean jobs in mess prone areas.
It is perfect in laundry rooms, pet areas and foyers. When
determining valve placement, consider the most effective
placement for the 10’ reach of the hose.
Example: In the laundry room, install the valve at a height that is
convenient for cleaning the dryer vent based on the vent location.
The valve can be installed so the hose retracts up or down.
In some installations the hose retraction may interfere with
the on/off switch and turn the system off unexpectedly.
This can be avoided by repositioning the valve so the hose
pulls away from the switch for most uses.
Note
: The hose is stored in the tubing and needs to be in a
vertical position for best performance when pulling out/
retracting in. The compressed hose is 30” long. A tight 90
degree elbow installed 32” from the valve will prevent the
retracting hose from expanding and being pulled into the
horizontal tubing.
New Construction Rough-In
Attach the frame to the stud.
Determine the best location for the
valve and attach to the stud. Be certain
the final location allows for 32” of tubing
for hose storage. Make sure the frame
is level.
Kit Includes:
• Pipe Fitting
• Rough-In Frame
• Mud Cover
Rough-In Kit
(P/N HS3000R)
