VRmagic Eyesi Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 80

VRmagic Eyesi Скачать руководство пользователя страница 62

8.2 Troubleshooting

The table below will help you resolve common problems that you may experience.
Never attempt to make any other repairs than the ones listed below. If you have
any other problem, refer to the person in your organization responsible for simulator
maintenance, or contact VRmagic technical service directly.

Problem

Possible Cause

Recommended Action

The simulator does not turn
on when the power button is
pushed.

If you can not solve this prob-
lem, please refer to the text
below.

Whole system
has no power.

Make sure that the power
supply voltage matches
the voltage setting of the
simulator (

section 4.10 on

Make sure that the power
cables at the front of the sim-
ulator PC under the table are
connected (

The simulator does not turn
on when the power button is
pushed, but the table can be
moved up and down.

If you can not solve this prob-
lem, please refer to the text
below.

Simulator PC
has no power.

Make sure that the power in-
let of the simulator PC (

5 on page 21) is connected
to the power outlet at the top
of the lifting column.

System still without power

If you have checked the above points but the system is still without power, please
provide the service technician with the answers to the following questions:

Does the table move up/down when the switch on the table front is operated?

Does the touch screen have power? Press the power button on the right side of
the touch screen and wait for a message on the screen.

Disconnect the simulator from its power supply. Observe the LEDs of the simula-
tor PC front panel while re-inserting the power plug. Do the LEDs flicker?

Nothing is displayed in the
microscope.

Microscope is
not connected.

Make sure all cables coming
out of the lower end of the
microscope arm are connect-
ed to the corresponding ports
of the simulator PC.

OLEDs need
resetting.

Use the

Reset OLEDs

func-

tion in the

System Status

menu (

Â

see user guide).

Eyesi Surgical Simulator – Installation and Operating Guide

62

Troubleshooting and Service

«
...
60
61
62
63
64
...
»

Содержание Eyesi

















































































Отзывы:

Нет отзывов