VRLA eZipp, Руководство пользователя

Страница: 13 / 20

Fuse Replacement
Fuse replacement : When the frequent fuse failure* occurs, it usually indicates short circuit or an overload in the electrical system or in the
controller.
Never use the fuse with different rating from the specified (20Amp)** because due to this, serious damage can occur in the electrical
system or a fire may result causing a dangerous loss of the vehicle.
Fuse Replacement Process:
Switch OFF the ignition lock before checking or replacing the fuse (to prevent an accidental short circuit)
*If the appropriate rated replaced fuse burns out in a short time, there is probably a serious electrical problem with your bike, in such case
contact your nearest franchisee.
** Replace the fuse with proper rated new fuse (20 Amp) as higher rated fuse can increase the chance of danger to the electrical system.
*** A loose fuse can cause damage to the electrical system, so make sure that the replaced fuse is plugged inside tightly.
a) Remove the foot mat b) Open the battery lock c) Take out the battery box d) To open the fuse holder,
turn the fuse cap anti-
clock wise and lift out the
fuse. Slide the old fuse out
of the cap and discard it. e) Insert the new fuse back
into the fuse holder and
close the fuse cap rotating
clockwise.***