13 www.vrisimo.com
Transport, Removal and Storage
ATTENTION
To transport, disengage PTO lever before lifting shredder to the highest transport
position. Raising the shredder while the PTO is engaged will cause the shaft to bind
or even break and may cause injury to the operator.
Disengage PTO and shut off engine allowing all movement to stop before leaving the oper-
ator
’
s position to adjust, lubricate, clean or unclog the machine. Before working on or un-
derneath the mower/shredder, place blocks on both sides (front and rear) of tractor tires
and under each end of the shredder to prevent accidental lowering of the machine. Also
remove the ignition key from the tractor and allow all movement to stop before beginning
work.
Removal
1.
Remove the adjustable top link from the tractor and shredder.
2.
Disconnect the drive shaft from the tractor and shredder.
3.
Remove the safety pins from the lower three point arm pins and pull the arms off the
pins.
Storage
1.
Put the drive shaft away in a clean, dry place.
2.
Clean the shredder thoroughly.
3.
Relax belt tension.
4.
Lubricate the shredder as recommended.
5.
Check oil level in gearbox and fill as required.
6.
Check for worn parts and replace so you will be ready to work when necessary.
7. Store in a clean, dry place.
500 Series
