VRiSim Installation
With JetPit, an “Install DVD” is included. When you insert it in DVD driver of your
computer, “
VRinsight HTML”
document will be shown. Then click “
VRiSim
” (operating
software) and install it at a proper folder.
“VRiSim” is the main operating software of VRinsight used for all VRinsight flight panels.
VRiSim software supports all functions of JetPit and completely interfaced with MSFS9
and MSFSX enables full simulation with simple connection your computer through USB.
Be sure that when installing VRiSim, “Install USB-Serial Driver” must be checked.
After installation, you can find “SeiralFP2” in “All programs” of “Start menu”.
USB Connection
The connection between JetPit and your computer is made by using a USB cable that
plugs into one USB port on your computer.
.
If you want to use a USB hub, be sure that
the USB hub is USB 2.0 compliant. Otherwise it may cause a malfunction
.
When you connect JetPit to your computer, your computer will detect it and will
When you connect JetPit to your computer, your computer will detect it and will
describe the process step by step.
Power Connection
Power supplying of JetPit is done by USB port and that of TFT LCD monitor is done by
110V / 220V free power cable.
Run “VRiSim”
When you confirm all setup processes done; “VRiSim” installation, “USB connection”
and “Power connection”, you are ready to operate JetPit.
Download & install “FSUIPC”
Refer to “Download & install FSUIPC” at “Download” part of
www.vrinsight.com
FS 9 requires FSUIPC v3.80 or later. FSX requires FSUIPC v 4.26 or later
5
