5
4
Service
The product is not user serviceable and has no user-serviceable parts
except replacement of the seat pad once worn.
If the product is not working, try switching it off, and recharging
it for
30 minutes before attempting to switch it back on.
If your product requires repair, you must contact us, stating the model
name and serial number (found on the label on the rear of the product).
If the product is to be returned to us for repair, carefully repack it in its
original packaging along with a letter stating your name and address,
a copy of your original receipt or purchase, and the reference number
provided to you by our service line.
We may ask you to return only part of your unit for service. This
should be robustly packaged to avoid further damage.
Contact Us
More information on this and other products can be found on our
website at:
www.vrgochair.com
You can make contact with us via:
VRGO Ltd, BRL, T Block, University of the West of England,Frenchay
Campus, Coldharbour Lane, Stoke Gifford, Bristol BS16 1QY
Health and Safety
TO MINIMISE THE RISK OF PERSONAL INJURY OR DAMAGE, US-
ERS MUST READ THE FOLLOWING HEALTH AND SAFETY GUID-
ANCE BEFORE USE:
Read all of the manual before use. VR users can easily become diso-
rientated. Care should be taken to avoid serious injury due to falling
The device is now ready to be paired with your Bluetooth device – if
you scan for devices it will show up as VRGO Chair.
Once paired, the LED will show a steady colour. The colour identifies
one of the four possible modes of operation. The 4 modes can be
cycled through by briefly pressing the button, and should be selected
for best operation depending on the application/game.
The modes are as follows:
White: Keyboard
Yellow: Keyboard and Mouse
Blue: Gamepad Controller (No Yaw)
Purple: Gamepad Controller (with Yaw)
Once the desired mode is selected, the device is ready to use. Care-
fully sit on the VRGO, and steer your way around your own virtual
reality by leaning and turning in the direction you want to go.
Care and Cleaning
Your VRGO has a tough composite outer shell, however some precau-
tions should be taken to ensure it remains in best condition.
Disconnect from the charger and switch off the unit while cleaning
.
Wipe clean with a damp cloth. Do not use abrasives, or abrasive
cream cleaners. Avoid the faceplate area where the electrical con-
nections and push button switch are located – these should not be
exposed to moisture.
The seat pad can become dirty and worn with heavy use. This can
either be replaced or covered with a new foam pad, which is available
online.
