Vremi VRM050659N, Руководство пользователя

Страница: 3 / 5

4 5
1. Make sure the optional inflation air valve is securely closed.
2. Plug the AC electrical line cord into an AC electrical outlet
protected by a ground-fault circuit interrupter. Check the
correct voltage before connecting
.
3. Turn the Knob to the INFLATE position. The pump will start
inflating automatically.
4. When the mattress is fully inflated, turn the Knob to the
OFF position.
5. Disconnect the AC line cord from the wall socket.
6. Always keep the Knob on the OFF Position while the mattress
is in use.
Tips: Over pressure protection is on while inflating. There is a
blow-off valve inside of pump which will be triggered once the
pressure is up to 3.5 Kpa (0.507 psi).
Manual Inflation Option
If the electric pump is not available then a conventional foot or
manual air pump can be connected to the optional inflation valve
for inflation.
Note: Do not use air compressor or high pressure pumps. Do not
over inflate - excessive inflation of the air chambers can cause the
chamber to burst or damage to the welding seams.
1. Remove the valve totally from the valve insertion. Then pull the
stopper out of the valve extension. Inflate the mattress by air
pumps. Blow in sufficient air until the chamber is fully inflated.
2. Close the valve by firmly inserting the stopper and pressing the
valve into the chamber.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
For Household Use Only
Before using this appliance, please read the manual carefully and keep it for future reference. Incorrect operation due to ignoring
of instructions may cause harm or damage. Always observe the following important safety instructions.
1. WARNING: To prevent possible electric shock, do not attempt to plug in power cord with wet hands.
2. WARNING: To prevent possible electric shock, connect power cord into a grounded receptacle protected by a ground-fault circuit
interrupter (GFCI).
3. WARNING: To prevent possible electric shock, never use a damaged power cord. If the supply cord is damaged, it must be
replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
4. WARNING: Do not use extension power cords with this product.
5. WARNING: This appliance is for indoor household use only. Keep it away from fire.
6. WARNING: In order to reduce the risk of electric shock, do not expose it to rain. Store indoors.
7. RISK OF COMBUSTION: Do not place the air mattress against or near any open flames, heaters, furnaces or other hot objects.
8. IMPORTANT: Do not operate the electric pump for more than 4 minutes at one time, take 5 minutes break between uses, as
overheating may occur and the pump will automatically shut off. It will be ready to use after cooling down. This automatic shut off is
for your safety. Unplug the electrical power cord when it is not in use.
9. WARNING: Do not obstruct the air passage opening or insert any objects into the opening at any time.
10. WARNING: Do not stand, jump or use the air mattress as a trampoline. Always supervise children near the air mattress.
11. WARNING: This product is not a raft or floatation device. Do not use it near or in the water.
12. WARNING: Children must not be left unattended when using the air mattress.
13. WARNING: The storage bag is not a toy. To avoid danger of suffocation, keep the air mattress storage bag and any other bags
away from children. Fold up the bag and store away from children when not in use.
14. WARNING: Keep pets away from the air mattress. Pets may tear or puncture the air mattress.
15. IMPORTANT: Make sure the area is flat, smooth and free of sharp objects that can puncture the air mattress. Do not set up the air
mattress near stairs, doors, drops, sharp edges or breakables.
16. IMPORTANT: To minimize any chance of rolling, tipping or swaying, avoid sleeping on the edge of the air mattress. Edges provide
less support than the middle of the air mattress.
17. IMPORTANT: This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
18. WARNING: Infants have suffocated on inflatable mattresses. Never place infant aged birth to 15 months to sleep on this inflatable
air mattress/air bed. Infants can suffocate on an under inflated or deflated mattress, on bedding, by co-sleeping with another
person, and by entrapment between the mattress and bed frame or between the mattress and a vertical surface.
19. WARNING: Children can be entrapped between the inflatable mattress and an adjacent vertical surface. Provide at least a
shoulder width space between the inflatable mattress/air bed and adjacent vertical surfaces such as walls, dressers, or other
objects.
20. WARNING: Always keep the inflatable mattress fully inflated when in use.
21. WARNING: To reduce the risk of electric shock, always unplug the power cord from the electrical outlet before cleaning.
THIS MATTRESS IS INTENDED TO BE USED WITHOUT A FOUNDATION. This mattress meets the requirements of 16 CFR part 1633
(federal flammability (open flame) standard for mattresses) when used without a foundation. 8017253
Operation
INFLATION INSTRUCTIONS
DEFLATION INSTRUCTIONS
1. Make sure the optional inflation air valve is securely closed.
2. Plug the AC electrical line cord into an AC electrical outlet
protected by a ground-fault circuit interrupter.
3. Turn the Knob to DEFLATE position. The pump will start
deflating automatically.
4. When deflation is completed, turn the Knob to OFF position.
5. Disconnect the AC line cord from the wall socket.
6. Always keep the Knob to OFF position before storage and
maintenance.
Manual Deflation Option
Remove the valve from the valve insertion. Then pull the stopper
out of the valve extension. It should deflate the air. To get all of
the air out, start to fold or roll the mattress starting from the end
opposite of the air hole and moving towards it.
Example of air pump
Valve Insertion
Valve
Stopper