vRbikes vR3, Руководство по эксплуатации

Страница: 9 / 20

9
4.3.1. Light switch
When the ignition is turned on, the position lights and dipped headlights are automatically switched on. When requi-
red, an additional headlight may be flipping on by turning the blue switch.
4.3.2. Indicators
The indicators can be activated by sliding the grey switch to the left or right. In order to return the indicators to neu-
tral position, press on the small grey button above the slider.
4.3.3. Horn
If you want to give an acoustic warning signal, press the yellow button.
4.3.4. Rear brake
In addition to the recuperation brake, the vR3 also possesses fully hydraulic disk brakes. The two rear brakes are
operated with the left brake lever.
Even if they are not often used in daily operation; operate both brakes regularly in order to avoid in-storage
deterioration.
4.4. Right-hand operating levers
The throttle grip, riding direction switch and brake lever for the front brake are located on the right of the handleber.
Optional switch
Riding direction switch
Figure 7: Right-hand operating levers
4.4.1. Optional switch
This switch may be used for additional vehicle options. (e.g. special signal, gyro light, etc.)
4.4.2. Riding direction switch
The riding direction switch is used to determine the riding direction. Slide the switch to the left if you want to ride
forwards. If you want to engage the reverse gear, slide the switch to the right.
Only operate the riding direction switch when you hear the relay in operation (clicking under the seat) after
turning on the ignition. Signals are only transmitted from the controls once this has happened.