VQ AICHI D3A1 VAL VQA138 GREEN, Инструкция по эксплуатации

Страница: 14 / 19

Insert the vertical fin into the fuselage, precisely align the vertical stabilizer
as described in step 14C.
Apply the thin CA glue on the vertical stabilizer where it contacts the fuselage.
! Securely glue together. If coming off during fly, you lose control of your
air plane.
Remove the vertical stabilizer from the fuselage.
Using s sharp hobby knife, carefully cut away the
covering below the lines which were drawn in the
previous steep. Do not cut into the woods as this
will affect the structural integrity of the stabilizer (15A).
Without using glue yet, push the elevator and its
hinges into the hinge slots in trailing edge of the
horizontal stabilizer (15C).
CA
Apply thin CA
glue on the top
of the hinge
Apply a thin layer of petroleum jelly
HORIZONTAL STABILIZER
HORIZONTAL STABILIZER
TOP-SIDE
TOP-SIDE
Do the same way with the bottom side
of elevator and with the second elevator.
Cut away only
the covering
CA
Apply thin CA
glue both side
Apply thin CA
glue on the top
and bottom
of the hinge
CA
15- VERTICAL STABILIZER
15A
15B
15C
15D
! Securely glue together. If coming off
during fly, you lose control of your
air plane.