VPro Intelligent RM-411 GENIUS, Инструкция по эксплуатации

Страница: 7 / 22

9
Setting of the remote controller
Key learning function:
Setup method:
1. Press once the device key of the page to be
learned, and then press and hold down Learn
key for three seconds to start the learning function.
" "
2. Horizontally aim the infrared emission
window (usually refers to the infrared
emission device installed on the front of
a remote control) of the original remote
control of the TV set at the infrared
emission window of this remote control
(with a distance of 2cm-5cm).
3. Press any function key of the original TV
remote control and release it when the
indicator light is continuously on; instantly,
the data of the function key is copied
and transmitted to this remote control.
4. Press the corresponding key in the TV area
on the panel of this remote control; now the
indicator light flashes again, and the above
data has been instantly transferred to the
selected corresponding key of this remote
control! According to your needs, you may
repeat steps 3-4 to copy and transfer the
data of each key; when finish, press “SET”
key to exit and cease the Remote Control
Keys Copying and Transferring Function status.
This remote control
This remote
control
※ Copying and transferring function has specific storage space; when
the storage space is used up, the indicator light turns on and rapidly
flashes five times, prompting that the copying and transferring
function cannot be used.
If you want to clear copied and transferred information under a
device of the remote control, please press tightly “SET” key and
simultaneously press the said device key; then enter 9981 when
the indicator light is on, and the information is cleared.
Code inquiring mode
After making manual automatic search of the code, perform the following
steps and you will get the code that controls your home appliance device
：
1. First press "device type selection" key of the home appliance device you
search for such as TV 1, VCR 1 etc., and the indicator will flash once
in the meantime .
2. Push down “SET ”key and do not release, then press number key “4”on
the remote controller and pay attention to the times the indicator flashes.
The flashing times of the indicator stands for the number at the units digit
of a 4 digit code.
3. Push down “SET ”key and do not release, then press number key “3”on
the remote controller and pay attention to the times the indicator flashes.
The flashing times of the indicator stands for the number at the tens digit
of a 4 digit code.
4. Push down “SET ”key and do not release, then press number key “2”on
the remote controller and pay attention to the times the indicator flashes.
The flashing times of the indicator stands for the number at the hundreds
digit of a 4 digit code.
5. Push down “SET ”key and do not release, then press number key “1”on
the remote controller and pay attention to the times the indicator flashes.
The flashing times of the indicator stands for the number at the thousands
digit of a 4 digit code.
Note In inquiry of a code no flashing of the indicator means zero.
（ ）
： ，
10
Volume sharing
By setting this function, you can use the volume control under the
TV device mode to control the TV device even if the remote control
is not currently matched with such device.
Setting method:
※
※
Press and hold down “SET” key, and then press “DEVICE” key; now
the indicator light is on; please enter the code 9901, and the volume
sharing function is on.
Press and hold down “SET” key, and then press “DEVICE” key; now
the indicator light is on; please enter the code 9902, and the volume
sharing function is cancelled.
Code locking and unlocking
Code locking
First press and hold down “SET” key, and finally press “DEVICE” key
(such as selecting TV device), and the indicator light will turn on; now
please enter 9911 and the code will be instantly locked; no data through
any operation can overwrite this code.
Code unlocking
First press and hold down “SET” key, and finally press “DEVICE” key
(such as selecting TV device), and the indicator light will turn on; now
please enter 9912 and the code will be instantly unlocked; the user can
re-enter a code normally.
Note: when the code is locked, the user cannot switch the appliance
used or enter the remote control code until code unlocking is carried
out for the locked appliance.
Restore to factory defaults
Press and hold down “SET” key, and finally press “DEVICE” key, and
now the indicator light is on; please enter 9990, and this remote control
will be restored to factory defaults.
Special notes:
1. Please make sure that the infrared emission end of this remote control aims
properly at the counterpart of the original remote control of the appliance,
and that the two controls keep a working distance.
2. This remote control cannot add any new function to any appliance; therefore
this remote control cannot be used if your appliance does not have an
emitting and receiving device.
3. When putting batteries into this remote control, please check and make sure
that all batteries are at the correct polarity.
4. In case of improper operation, this remote control may not be normally used
and controlled; under such circumstances, please try to take out the
batteries and reinstall them in 20 minutes, and the remote control will be
back to normal.
Technical parameters
Remote control distance: larger than 8 meters (depending on the
machine types)
Power: DC 3V (two AA alkaline batteries)
This company reserves the right of final interpretation for this instruction
manual and it will make no specific notice in case of changes for the
design and technical data.