
2-6
Installing the VSU-5000
VSU-5000 User Guide
1.
Connect the gateway router to the VSU-5000.
Using the supplied UTP crossover cable connect one end to the public port on
the VSU-5000. Connect the other end of the UTP crossover cable to the
router’s Ethernet port (Figure 2-5).
Figure 2-5
Attaching a Router to the VSU-5000
2.
Connect the VSU-5000 private (unencrypted) port to the LAN hub or switch
using the supplied straight-through cable.
3.
Connect an asynchronous ASCII terminal or PC running terminal emulation
software to the VSU-5000.
Connect the female DB-9 connector of the null modem cable to the Console
port on the VSU-5000. Connect the other female DB-9 connector to the
terminal. The terminal’s communications parameters should be set to 9600
baud, 8 data bits, 1 stop bit, no parity, and hardware flow control.
4.
Power on the router, and configure if necessary.
5.
Power on the VSU-5000 and proceed to
Chapter 3
,
Preparing the VSU-5000
for Configuration
.
Connect UTP Crossover Cable between
the VSU-5000 Public Port and the Router
Private LAN
Connection