8
•
For normal music listening all the anti-skate you need will be supplied by the lead out wire of
the tonearm to junction box unless you are using test records and measuring sine waves. For
music listening the push back of the wire is ideal for anti-skate.
•
We supply mechanical anti-skate for those who require it.
If you try adjusting the anti-skate with a groove
less record, you will ruin the twist in the tonearm
wire and void your warranty. Do this with the
mechanical anti-skate if you want that much anti-
skate.
Playing Records
•
Before playing a record, make sure that both of the tonearm VTA thumbscrews are slightly
tight.
•
Place the black washer on the platter, then the record, then the record clamp. Always turn off
the turntable before installing the record clamp.
•
Press the power button on the motor. Sit down and enjoy listening to your records!
General Use
•
Allow at least 20 hours of break-in time.
•
The motor will make some low-level noise. This will not get into the system. The motor and
bearings will become quieter as you use your Prime 21. Place the motor on a mouse pad for
better isolation if this bothers you.
