8
General Use
Allow at least 20 hours of break-in time.
The motors will make some low-level noise. This will not get into the system.
The motor and bearings will become quieter as you use your SM.
If you notice hum in the system, remove the interconnects and replace them
with very cheap, standard VCR interconnects. These are well shielded and
should eliminate the hum. If the hum goes away, get quality, well shielded
interconnects.
After at least one year of use, the platter bearing and motor will need to be
lubricated. For the platter bearing use a blob of white lithium grease placed on
the ball. For the motor, use 1 drop of 40-weight motor oil below the brass
piece.
Additional Items Available from Your Dealer
The VPI Synchronous Drive System power supply provides a major increase in
musicality by feeding the 300 RPM synchronous motor a perfectly stable wave
form at the frequency you choose. The SDS lets you change speed
electronically.
The HR-X periphery record clamp will fit the platter of the Scoutmaster and
provide a vacuum-like grip on the record. The clamp removes all warps and
damps the record to prevent ringing.
