4
Specifications
Model: WVH100
FCC ID : HQXWVH100
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Notice:
The changes or modifications not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment.
Important Note:
To comply with the FCC RF exposure compliance
requirements, the antenna(s) used for this
transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and
must not be co-located or operating in conjunction
with any other antenna or transmitter. No change to
the antenna or the device is permitted. Any change
to the antenna or the device could result in the
device exceeding the RF exposure requirements
and void user’s authority to operate the device.
Mounting Type
External type
Image sensor
1/3” CMOS camera
Resolution
520 TV lines
Min illumination
0 Lux with IR on
Water resistance
IP69K
View angle
100°(H), 74°(V), 137°(D)
Dimension
115.2(W) X 74.6(H) X 71.5(D)mm
4.53(W) X 2.94(H) X 2.82(D)Inch
Working temperature
-4°F ~ 158°F
Weight
Approx. 0.3 kg / 0.66 lbs
