Front PADIN2 Features
Figure 2
1) Bass Control Knob- Turn knob clockwise to increase bass and counterclockwise to
decrease bass.
2) On/Off Knob- This knob turns the PADIN2 on and off.
3) Treble Control Knob- Turn knob clockwise to increase treble and counterclockwise
to decrease treble.
4) Radio- Pressing this button switches between PADIN2 and radio.
5) VCP- This button switches the PADIN2 to VCP and also triggers the monitor.
Indicator light will be lit when this function is selected.
6) PA- This button switches the PADIN2 to the PA/MIC system. The indicator light will
be lit when this function is chosen.
7) Paging Mode- This button is used to page over the PA system. The indicator light
will be on when this button is depressed. An additional push of this button will toggle
back and forth between the internal and external paging system.
VCP Controls
NOTE: For these controls to function, the IR repeater/emitter must be
installed over the IR window on the VCP.
8) FFWD- This button fast forwards the tape in the VCP.
9) Play- This button starts the tape playing in the VCP.
10) VCP Power- This button powers the VCP on and off.
11) Stop- This button stops the tape when it is in “play” or another mode.
12) REW- This button will rewind the tape when it is in “play” or “stop” mode.
13) Replay- This button will stop the tape and rewind back to the beginning of the tape
and resume play mode.
Figure 3
4
Microphone Cable Adapter
Switchcraft D4M Connector
Philmore T609CB Connector
