5
1.
Press the
POWER
(
)
button on the front panel or the
POWER
button on the remote
control.
2.
Press the screen release (
PUSH
) button. The screen will pop open a short distance. Raise the
screen up 90 degrees to access the DVD mechanism.
3.
Snap a DVD, CD or MP3 disc onto the hub (label facing outward). Spin the disc to ensure
that it is properly attached to the hub.
4.
Lower the screen back to its stored position and press on the bottom of the screen to latch
it to the DVD housing. (Note: For safety reasons, the DVD will not play if the screen is not
latched closed. The headrest can be tilted forward or backward to adjust the viewing angle.)
5.
When the DVD menu appears, select the menu item using the
+
/-
buttons on the front
panel and press the
Play
(
4
/
;
) button to start the DVD playing. If using the remote
control press the
or buttons to select the menu item and then press the Play (
4
;
)
button to start the movie playing.
6.
If using IR wireless head phones, first turn the volume control to its lowest setting, press
the power button and increase the volume to a comfortable listening level.
7.
If audio playback through the vehicle radio is preferred, use the following steps:
•
The FM Modulator can be set from 88.1MHz to 107.9MHz
.
Pick one of these frequencies that is either unused or is a very weak station
•
Long press the
MENU
(
) button on the front panel and short press the
MENU button at FMM selection or the FM ON/OFF button on the remote control
until FMM ON appears on the screen.
•
Press the
+
/-
buttons on the front panel or the
or on the remote control to set
the FM Modulator frequency to the frequency setting on the vehicle radio.
•
To turn off the FM modulator repeat the above steps until FMM OFF appears on the
screen.
NOTE:
If driving long distances it may be necessary to change the vehicle radio to
another weak station and then change the FM modulator to the same frequency if there is
interference with a local FM station.
Quick Start Guide
