Installation Process
1.
Plug device into OBDII port.
2.
Start the vehicle, you should see green, yellow and red flashing LEDs on the front of the
device. (Checking for License/Network)
3.
If for any reason you do NOT see the LEDs flashing after this process, unplug the device and
repeat steps 1 and 2.
4.
Now that the device is plugged in, the wireless activation may take up to 10 to 15 minutes.
Please leave the device plugged in for at least 10 to 15 minutes to confirm that the activation
was successful.
5.
Once the Yellow and Red LEDs are SOLID and the Green LED is
slowly flashing - the device is successfully activated. (Synced)
NOTE: Data may not appear on your account until you go for a drive.
6.
Log into your CarLink Application and navigate to the Location tab.
Here you can view the most recent location your vehicle.
NOTE: If you do not see data on your account, unplug your device and repeat steps 1-6.
Please follow these steps to power up your
device and test network/GPS connection
–
the activation may take up to 15 Minutes:
LED
Function
Proper
Activation
Blinking Slowly
Blinking Rapidly
RED
Power
Solid Light
N/A
N/A
YELLOW
Cellular
Solid Light
No GPS or Wireless
Connection
NO Wireless
Connection
GREEN
OBD
Blinking Light
Proper Activation
N/A
For more information, including FAQs, please visit www.CarLinkUSA.com
For technical assistance, please call 1-800-300-4550
The Device LED’s will rapidly blink when checking license & network. In all other instances they will flash as follows:
