6
PRORS PR1BTWZ Owners revC
Remote Start Ready Mode must be enabled if your vehicle is equipped with a
manual transmission.
Remote Start Ready Mode - Manual Transmission Vehicles Only
To activate the remote start function, the system must first be in Remote Start Ready
Mode. Follow the steps below to enter remote start ready mode.
1. While the engine is running by the ignition key;
a. Place the transmission in neutral.
b. Set the parking brake
2.
With your foot off the brake pedal, press and hold the
button to
activate the remote start. The remote will beep four (4) times and the parking
lights will turn on to confirm the system has remote started.
3. Remove the keys from the ignition, the vehicle will remain running.
4. Exit the vehicle and close all vehicle doors.
5. Within one (1) minute of step 1, press the button one (1) time to lock the
vehicle’s doors.
The system will wait three (3) seconds then the vehicle will shutdown and sound two
(2) short chirps then one (1) long chirp to confirm Ready Mode is set.
To Enter & Exit the Vehicle while (Manual Transmission) Remote Start Ready
Mode is already active without cancelling Remote Start Ready Mode.
If ready mode has already been activated and you need to enter the vehicle, possibly
to retrieve an item, and will exit the vehicle without driving it, you can keep ready
mode active by following the steps below.
1. With Ready Mode already previously set, activate the remote start.
2. While under control of the remote start open vehicle door to retrieve
items.
3. Exit the vehicle and close all doors.
4. Press the
button.
The system will wait three (3) seconds and then shuts down,the system will verify all
doors have been closed then will emit the two (2) short / one (1) long tone and light
flash pattern indicating Manual Transmission Ready Mode is active.
Note:
If the two (2) short / one (1) long tone is not heard then Ready Mode has not
been set.