Voxx Electronics CA-510, Руководство по установке

Страница: 10 / 15

128-6832
10 of 16
9
TO PROGRAM ADDITIONAL TRANSMITTERS:
1) Enter the vehicle, and turn the ignition switch to the ON position.
2) Press and release the Programming button switch 3 times.
3) The dash mounted LED will flash 1 time, and the lights will flash 1 time, indicating that the system is ready
to accept programming of channel #1 which is lock.
4) Press and hold the lock symbol button of the transmitter you wish to program for 4 seconds or until a long
flash from the parking lights
"Repeat step 4 for each transmitter you wish to program"
5) Press and release the valet push button switch 1 time to advance to channel 2. The lights will flash 2 times
and the dash mounted LED will Flash 2 times, indicating that the unit is ready to accept programming for
channel # 2 which is only used for the unlock.
6) Press and hold the unlock symbol button of the transmitter you wish to program for 4 seconds or until a
long flash from the parking lights
"Repeat step 6 for each transmitter you wish to program"
7) Press and release the valet push button switch 1 time to advance to channel 3. The lights will flash 3 times
and the dash mounted LED will Flash 3 times, indicating that the system is ready to accept programming
for channel #3 which is only used for remote start.
8) Press and hold buttons of the transmitter you wish to program for 4 seconds or until a long flash from the
parking lights.