Voxware BTH430, Быстрый старт

Страница: 8 / 12

BTH430 Quick Start Guide v.1
Part No: BTH4XX Manual v1.0 7
Understanding LED Lights and Tones
Primary Features Headset Control LED Light Tones
Pairing With Power Off, Press Multi-
Function Button for 4 Seconds
Blue and Red
Alternate Flash
“Pairing”
Pairing Complete Automatic No LED Output “Pairing Successful”
Power On Press Multi-Function Button for 2
Seconds
Blue Flash 3 Times “Power On”
Power Off Press Multi-Function Button for 2
Seconds
Red Flash 3 Times “Power Off” or
4 Note Falling Scale
Volume Press or Volume - to
Increase or Decrease Volume
No LED Output < Increase Volume
>
Decrease Volume
Connected Automatic No LED Output Double Short
Connection Lost Automatic Blue Solid “Lost Connection”
Clear Paired Device List Press Multi-Function and
Volume- for 7 Seconds
Red Alternate Flash
5 Times
Double Low
Low Battery Warning Automatic Red Flash Twice
Every 2 Seconds
“Low Battery”
Low Battery Shutdown Automatic Red Flash 3 Times 4 Descending
Auto Shutdown Automatic Red Flash 3 Times
then Power Off
4 Descending
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Voxware™ is under license. Other trademarks and trade names
are those of their respective owners.
Cleaning and Maintenance
To maintain the BTH430 Headset we suggest the following guidelines
:
• Do not expose the Headset to harsh chemicals or cleaning agents.
• The Battery must be fully inserted and locked into place in order for it to become IP67
Waterproof. Do NOT immerse the Headset in water beyond 3 feet (1 meter) for beyond 30
minutes per IP-67 Specifications.
• If the Headset becomes dirty, wipe it with a soft damp cloth. Do not use soap, cleaning fluids or
chemicals.
•
Keep dust, dirt and debris out of the Headset Battery Slot and the Battery Charger Slots.
• When handling the Headset Battery, keep the Battery Contacts free of dirt, grease, oil and other
substances that can affect the Battery from making proper contact with the Headset or Charger.
•
Battery contacts must be covered with protective sleeve to prevent short circuit and discharge
after the Battery is removed from the headset.