Voxson HD50, Руководство пользователя

Страница: 22 / 26

19
VOXSON HD50
TROUBLE SHOOTING
If receiver is not functioning correctly check it according to the procedures shown
below. If the receiver does not work properly after checking it, please contact the
dealer. DO NOT open the receiver cover.
The display on front panel does not light up
•
Check that the power cord is plugged into the wall outlet.
•
Check that the Power Switch on the back of the unit is on.
No picture
•
Make sure that the product is in Operation Mode.
•
Make sure that the AV Cable is correctly connected to the TV.
•
Make sure that antenna cable is correctly connected to the equipment.
•
Make sure the TV is in the correct AV mode.
•
Check the brightness level of TV.
No or bad signal message appears
•
Check other devices connected between antenna and the receiver, or adjust the antenna position.
Poor Picture & sound quality
•
Install antenna in a position offering better reception.
•
Avoid putting mobile phone or microwave oven around the equipment.
•
Use 75
Ω
coaxial cable to connect the TV and antenna.
No or poor sound
•
Check the volume level of the TV.
•
Check the Mute status of the TV and STB.
•
Press the Audio button to change the Sound Track type.
Remote control does not work
•
To manipulate the equipment with the remote control, the control
’
s emitting part should be directly
pointing towards the receiving part (IR Sensor) of receiver.
•
Check the batteries in the remote control.
NOTE:
If the problem is still unsolved after going through this procedure please
contact customer support.