•
Put machine flat first, distinguish left and
right base and base installation front and
back direction
•
Install base in bottom of machine back cover
as arrow direction in figure
•
Align positioning hole/column of top base
and positioning column/hole of bottom of
machine back cover
•
Align screw holes, then fasten screws (notice
that base module has to be adjusted at
figure status, otherwise it cannot be
installed in)
9. Base Installation Instructions
Declares that the design and manufactureing of this product complies with the european
directives for CE-marking as stated below:
2014/35/EU (LVD)
2014/30/EU (EMC)
2011/65/EU (RoHs)
2017/53/EU (RED)
10. Marking
Images displayed on the PC
deviate. The screen is not full or
is exceeded. The display is fuzzy
1. Use automatic adjustment function
2. Enter “PC Image Mode” adjustment level or vertical
position
3. Use the recommended mode.
The remote control distance is
short or out of control
1. Remove the object to avoid blocking the remote
control receiving window
2. Replace the battery
The browser cannot access
any link
1. Ask the network administrator to obtain available IP
address and other parameters
2. Check if the network connecting cable is normally
connected
3. Consult the network service provider
Online video play is very slow
1. Please upgrade your network bandwidth
to a higher one
2. Please try to replace with other addresses to obtain
better resources
The images are colorless
Enter “Picture” setting to increase color saturation
Machine is slow, system crash,
can not operate the machine
Disconnect the power supply first, and connect the
power supply after about 1-2 minutes, then turn on
the TV again
