11
10
g. Now your computer has found out the Mouse. Click it.
h. Now the pairing is completed. Red LED flashing stops and the cursor’s
movement mimics that of the mouse.
6. Resolution Switch Between 800 / 1600 dpi
Press DPI switch button to switch between 800/1600 dpi for your better cursor
moving speed experience.
(ǃ) Note:
The Red LED on the mouse top is the low battery power indicator. Its 6-
seconds flashing indicates that the batteries inside the mouse are needed to
be replaced.
DPI switch button
Trouble Shooting
1. Make sure you have put the batteries in correction directions, and power switch is
ON.
2. Make sure you switch to the correct PC that you are working with.
3. For PC1, PC2, Bluetooth connection, make sure you have finished the pairing
between the mouse and your computers.
4. Check in the Bluetooth setting application if Bluetooth status is ON. If not, turn it
ON.
5. Make sure your computer is built in Bluetooth 4.0 or 5.0. If not, a Bluetooth 4.0
or 5.0 dongle is required.
6. For PC3, 2.4GHz connection, make sure you have connected the receiver correctly
to the computer's USB port.
7. Try another USB port, in case that your USB port is loose.
8. Replace new batteries if needed when the battery power is low.
9. If mouse performance is slow or intermittent around a wireless network, unplug
the Nano receiver from the USB port and then re-insert it. To reactivate the mouse,
switch it on, off and on again using the On/Off switch on the bottom of the mouse.
10. Repeat the connection procedure. You can also try moving the mouse closer to
the Nano receiver.
11. Try other working surface which the mouse is operating on.
12. For the best performance, we suggest that you place the receiver away from other
electrical devices.
Battery Use Reminders
1. Remove worn-out batteries from equipment immediately and dispose of them
properly.
2. Keep all batteries (used or new) out of the reach of children.
3. Never dispose of batteries in fire.
4. Do not mix old and new batteries. Do not mix alkaline, standard (Carbon-Zinc), or
rechargeable (Nickel Cadmium) batteries.
5. Remove the batteries from this device if the device will not be used for a long
period of time.
6. If the performance of the battery decreases substantially, it is time to replace the
battery.
Содержание P25WL
Страница 8: ...15 14...
Страница 9: ...16 For a smarter way of life...