Vox Technologies EMB-9670 series Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 101

Vox Technologies EMB-9670 series Скачать руководство пользователя страница 26

EMB-9670/9673 Series

26 EMB-9670/9673 Series User’s Manual

2.1 Installation Procedure

This chapter explains you the instructions of how to setup your system.
1.  Turn off the power supply.
2.  Insert the DIMM module (be careful with the orientation).
3.  Insert all external cables for hard disk, floppy, keyboard, mouse, USB etc. except for flat

panel. A CRT monitor must be connected in order to change CMOS settings to support
flat panel.

4.  Connect power supply to the board via the ATXPWR.
5.  Turn on the power.
6.  Enter the BIOS setup by pressing the delete key during boot up. Use the “LOAD BIOS

DEFAULTS” feature. The

Integrated Peripheral Setup

and the

Standard CMOS Setup

Window must be entered and configured correctly to match the particular system
configuration.

7. If TFT panel display is to be utilized, make sure the panel voltage is correctly set before

connecting the display cable and turning on the power.

2.1.1 Processor

Installation

2.1.1.1 Installing Pentium M CPU

•

The processor socket comes with a screw to secure the processor, please unlock the
screw first.

•

Position the CPU above the socket and the gold triangular mark on the CPU must
align with pin 1 of the CPU socket. Then Insert the CPU gently seated in place.

•

Turn the screw to the lock position.

Note:

Do not force the CPU into the socket. It may bend the pins and damage the
CPU.

Unlock

Pin 1 of the
socket

Gold
triangular
mark

Lock

«
...
24
25
26
27
28
...
»

Содержание EMB-9670 series






































































































Отзывы:

Нет отзывов