VOX electronics WK-4401, Руководство по эксплуатации, Страница: 5 / 77

3
KNOW YOUR WATER KETTLE
BEFORE USING YOUR KETTLE
The kettle should be cleaned before first use by boiling the Max capacity of water once
and then discarding the water. Wipe the surface with damp cloth.
NOTE: The max capacity of kettle is 1.7L
WATER KETTLE USE
1. Place the appliance on the level surface.
2. To fill the kettle, remove it from the power base and open the lid by pressing the lid
release button , fill with the desired amount of water and then close the lid.
Alternatively, the kettle may be filled through the spout. The water level should not
exceed MAX marks or be below MIN level. Too little water will cause the kettle to
switch off before the water has boiled.
NOTE: Do not fill the water over the maximum level, as water may spill out of the
spout when boiling. Ensure that the lid is firmly in place before plugging the power
outlet.
3. Place the kettle on the power base.
4. Plug the appliance into the power outlet. Press down the On/Off switch , the indicator
will light up. The kettle will start boiling water and when the water has been boiled the
On/Off switch will switch off the appliance automatically. You can turn off the power
Lid decoration
Lid
Lid button
Handle cover
Spout
Body
Handle
Switch
Power cord
Base
Base decoration