temperature in the cabinet rises gradually.
When the inside temperature rises above the set point, cooling
Self-control Temperature starts to work again, the cellar enters
into cooling cycles.
The TEMP-ADJ button is set on one certain point when the cellar is
off the assembling line. When you want to change the temperature
in the cabinet, please select the right zone and change accordingly.
VI. PARTICULAR PRECAUTIONS
●
In order to function at its highest potential, this wine cooler needs
to be placed on flat floor, with 2cm spaces at each side and 10cm
space at the backside.
●
Use the adjustable iron case to place the cellar fully horizontal.
●
Avoid direct sunshine and high temperature.
●
Do not place heavy articles on the top of the cellar.
VII.MAINTENANCE
●
Shut off power supply before cleaning cabinet.
●
Take out wine and shelves, and then clean the cabinet with soda
water first and with clean water last.
●
Do not use soap or detergent for the cabinet.
●
Clean the cellar regularly.
VIII. TROUBLESHOOTING
Symptoms
Possible cause
Solutions
No cooling
Plug not put in
Low voltage
Fuse broken
Put in the plug
Ensure normal voltage
Change fuse
Temperature
inside not cold
enough
The refrigerator is
placed too close to a
heat source;
Bad ventilation;
Fans don’t work;
The door is not
closed
tightly
or
opened
too
frequently or for too
long time;
Keep the refrigerator away from sunshine or
other heat source;
Place the refrigerator in the area with good
ventilation and keep things away from the
fans;
Check whether the plug is connected or
change the fan;
Close the door tightly and don’t open the door
too frequently or for too long time.
Peculiar smell
inside
refrigerator
Check whether there is
anything sour inside
Wrap the source or take it out
Inside
light
flashes
Set
temperature
higher than inner
Adjust the adjustor