2
ENGLISH
GENERAL INFORMATION
· Before carrying out any operation, read carefully the following instructions. KEEP THIS BOOKLET IN A
SAFE PLACE SO THAT YOU MAY CONSULT IT LATER.
· After removing the packaging, make sure that the appliance is in good condition. If you have doubts, do not
use the appliance and return to your retailer.
· The packaging materials contain plastic, nails, etc. which may be hazardous and therefore should not be left
within the reach of children.
ELECTRICAL CONNECTION
· Before connecting the appliance, make sure that the specifications on the data plate correspond to the
conditions of the electrical supply network.
· The electrical safety of this appliance can only be assured if it has been correctly grounded.
· This appliance conforms to the directives 89/336/CEE concerning electromagnetic interference.
WARNING
· We strongly recommend that the electrical installation be carried out by qualified professional personnel.
· Do not install the appliance in the immediate vicinity of bath tubs, showers, wash basins, swimming pools,
etc.
· This appliance is to be used only for the purpose intended by the manufacturer that is for area heating. Any
other use is improper and therefore dangerous. The manufacturer is not responsible for any damages caused by
improper and unreasonable use of this appliance.
· DO NOT PUT A COVER OVER THE APPLIANCE AS THE COVER COULD CATCH FIRE DURING
USE.
· Do not attach accessories or equipment not foreseen by the manufacturer.
· Improper installation can cause harm to persons and animals or damage to objects, for
· Install the appliance only in a horizontal position.
· Do not install the appliance under a light or fixed source of electrical supply.
· Avoid installation behind a door.
INSTALLATION
· Maintain a sufficient distance between the appliance and walls and objects. Minimum distances.
· Whenever the appliance is to be installed in a bathroom, it is necessary to maintain the required safety zone
around it.
· Do not install the appliance so that the heat rays directly bear on walls or adjacent objects.
· For fixture to a wall, proceed in the following manner:
－
Unscrew by one turn the screw A which determines the inclination of the appliance.
－
Turn the wall support to the end of its travel.
－
Unscrew the screw which fastens the cover of the wall support and remove the cover.
－
Determine the placement of the appliance and, with the help of the holes of the holes are to be drilled in the
wall.
－
Drill two 6 mm holes and insert the supplied dowels.
ENGLISH
