Votek UT-6301, Руководство пользователя

Страница: 18 / 33

- 18 -
Block Standard HTTP Port(80) Management: default UNBLOCK
If for some reason, the HTTP (80) service is blocked in your network environment and result to fail to configure
or manage UT-6301, then you select
BLOCK this function with using port 8080 , instead of standard port 80. So
you should enter: http://192.168.168.125:8080 in your browser.
Device Management IP Address: default
192.168.1.10
In case, you forgot the UT-6301’s IP address you ever set, this management IP can be used to connect to
UT-6301 to figure out what’s the current IP address be used.
In case, you set UT-6301’s IP Configuration as DHCP or PPPoE which will assign dynamic IP address to
UT-6301, you also can use this management IP address to find what’s the current working IP address in
Intranet.
Note: If you forgot the IP address setting even management IP address, please use the broadcast utility
we offer in CD to search it.
Device Hostname: default UTEK , maximum length 15 characters
To describe the name of UT-6301 for manage purpose.
Device Location: no default, maximum length
15 characters
To describe the location of UT-6301 for manage purpose.
Administrator Password
User Name: default admin
Password: default admin
To ensure the UT-6301’s security, you will be asked for your password when you access the
UT-6301’s Web-based Utility.
User Name: Enter the user name to one of your choice.
Password: It is recommended that you change the default password to one of your choice.
Password Confirm : Re-enter theUT-6301’s new Password to confirm it.
Block Ping Request : default UNBOCK
To prevent hacker intruding your network, check the BLOCK option to enable this function to reject
the PING requests from Internet.
MAC Address Change
The UT-6301’s MAC address can be changed from the original values if necessary. Some ISPs require users to
change the MAC address to a registered one when users change their access equipment. (Detail sees
Appendix B)
Reset System to Factory Default
Click “Apply”, if you want to return all the UT-6301’s current settings to its factory default. Note: do not restore
the factory defaults unless it is absolutely necessary
.
Reboot System
Click “Apply”, if you want to clear a connection, reboot, and re-initialize the unit without affecting any of your
configuration setting.