X's-Drive
VP2060
9
When X's-drive II is begin connected to the computer, the " Transfer" icon keeps
flashing during data transfers, when inserting a memory card into the slot, the
corresponding icon will appear and also flashes during data transfer.
Until the flashing icons are ceased to flash and buzzer sound "Bi Bi "Operation
system with native support:
DO NOT:
1. Disconnect unit from the computer
2. Remove memory card(s) from the card slot Otherwise, there may be a chance of
lost or corrupt data.
Under Windows 98SE, the X's-drive II should be connected to the system before the
driver has been installed.
Under Windows 2000 Professional, the X's-drive II should be connected to the
system before the driver has been installed, only one Removable drive will appear in
My PC, corresponding to the SD/MMC/MS memory slot. In this case, the driver must
be installed and then it must be updated by means of the Device Manager.
The X's-drive II is supported by the native MacOS X USB extensions, but DOS
volumes are not adequately supported by MacOS 10.0.x and lose of data can occur.
Upgrading to version 10.1 or later is mandatory.
