Vorwerk KOBOLD, Инструкция по эксплуатации

Страница: 11 / 28

11
Preparation
2.1.2 Charging without charging unit
• Ensure that the Kobold VC100 handheld vacuum cleaner is switched off.
• Press the pin on the charging unit to open it.
• Insert the small plug of the mains charger in the corresponding socket on the
handle of the handheld vacuum cleaner.
• Then insert the mains charger into the socket.
The function indicator shows that the handheld vacuum cleaner is being
charged.
The function indicator goes off as soon as the batteries are fully charged (after
approx. 4 hours). To achieve optimum charging, the handheld vacuum cleaner
must be charged until the function indicator goes off.
2.2 Placing the charging unit
Choose the fixing material in accordance with the properties of your wall.
• You need a screw to mount the charging unit
4
to the wall.
• Fasten the screw to the wall.
Ensure that the distance to the floor is at least 50 cm.
• Place the charging unit with the intended opening on the hook or screw.
You can also place the charging unit on an even surface (e.g., table or worktop).
Fig. 2.3 Opening the charging unit
Fig. 2.4 Charging without charging unit
4
4
> 50 cm
Fig. 2.5 Hanging up the charging unit