Vortice VORT PRESS 140 I, Инструкция пользователя

Страница: 12 / 56

12
higher should be provided for installation, enabling complete
disconnection under overvoltage category III conditions.
•
Products equipped with single-phase wiring (M) engines ALWAYS
require connection to 220-240V (or only 230V where required)
single-phase lines. Any kind of modification shall be considered as
product tampering and shall nullify the relative warranty.
DISPOSAL ENGLISH
This product complies with Directive 2012/19/EU on the management of waste electrical and electronic
equipment (WEEE).
The crossed-out wheeled bin symbol on the appliance indicates that, at the end of its useful life,
the product must be taken to a specialised company for transport and treatment. This company will
take care of the disposal of the various materials making up the product and their subsequent
proper recycling.
Alternatively, the manufacturer of the appliance is obliged to take back the product to be disposed of in
exchange for the purchase of an equivalent appliance.
• “Intelligent” timer: when the light is on, the product will start to work after approximately 40”; when the light
is off, the product will continue to work at minimum speed for from 30” to 30’ (adjustable - see fig. 22 and
following).
• The appliance with timer operates at maximum speed when the light is on, at minimum speed when the light
is off (fig. 13). A speed controller switch (fig. 14) can also be fitted. When the light is on and switch B is
operated, the appliance will operate at minimum or maximum speed; when the light is off, the fan operates
at minimum speed only.
FEATURES VORT PRESS IT LL ENGLISH