Vortice FB 1200, Инструкция пользователя

Страница: 7 / 20

Connection and assembly
The FB filter must be installed on a ventilation line,
upstream
from the fan/heat recovery sistem,
upstream from the noise attenuator NA, and if
present, upstream from the air heater AH. To install
the air filter, it is sufficient to insert it into the tube (Fig.
1).
The appliance is connected to the system by means
of a forced insertion on two cylindrical fittings in
galvanised steel with circular rubber built-in "T" seals.
Leave sufficient space to allow the filter to be cleaned
or replaced.
Technical data
Filtering class :
F7
Filtering media :
F7 Filter: composit polypropylene
Max operating temperature :
F7: 70° C
Dimensions : fig 2.
Curves of the initial load loss of filters :
Diagrams pag. 18.
Maintenance/cleaning
Check the filter from time to time and, if necessary,
replace it. Non reconditionable filters, which have to
be replaced when the loss of pressure is 1.5 times
above the loss that occurs when the filter is cleaned.
Clean the filter with mechanical means, a vacuum
cleaner or compressed air.
7
ENGLISH
FB
VORTNRG
NA
AH
1 1
A
B
C
E
D
2 2
Mod. A B C D E Kg
FB 500
235 285 300 200 400 6,5
FB 800 405 315 300 250 400 9
FB 1200
470 370 600 315 700 16
FB 2000 560 485 600 315 700 20
FB 2500 630 515 700 355 800 25
FB 4000
710 608,5 900 450 1000 34
FB 6000 710 805 900 450 1000 40