Vortex VX-P820 series, Руководство по эксплуатации

Страница: 11 / 32

VX-P820/-P870 S
ERIES
O
PERATING
M
ANUAL
9
B
EFORE
Y
OU
B
EGIN
Battery Charging
Insert the DC plug from the
PA-42
AC Adapter
into the DC jack on the bottom side of the VAC-
920 Desktop Rapid Charger, then plug the PA-
42 AC Adapter into the AC line outlet.
Insert the battery pack into the VAC-920 Desk-
top Rapid Charger while aligning the slots of the
battery pack with the guides in the nest of the
VAC-920 ; refer to the illustration at the right for
details on proper positioning of the pack. If charg-
ing with the transceiver attached, turn the trans-
ceiver off, and the antenna jack should be at the
left side when viewing the charger from the front.
If the battery pack is inserted correctly, the LED
indicator will glow red. A fully-discharged pack
will be charged completely in approximately 1.5
hours (
FNB-V86LI , 2.5 hours: FNB-V87LI ,
4.0 hours:
FNB-V92LIIS
).
The LED indicator will blink red/green alternately
when charging is nearing completion.
When charging is completed, the LED indicator
will change to green. Even if the charging is com-
pleted, the LED indicator will sometimes change
to red for trickle charging.
Disconnect the pack from the VAC-920 Desktop
WARNING
The FBA-34 was designed as a backup bat-
tery pack, and it can be used to power the
transceiver if you are in an area that does not
require the use of an intrinsically safe radio.
The VX-P820/-P870 is only intrinsically safe
with the use of the FNB-V92LIIS battery
pack.
Do not reverse-connect the battery terminals.
Do not parallel-connect the battery terminals.
Do not change batteries in hazardous loca-
tions.
To reduce the risk of explosion, recharge the
batteries outside of hazardous locations.
Align the slots of the battery pack
with the guides in the nest of the
VAC-920 Desktop Rapid Charger.
Rapid Charger, and unplug the
PA-42
AC Adapter
from the AC line outlet.