Vortex ROK DVS JUNIOR, Руководство пользователя

Страница: 9 / 39

13
Place intake cylinders inside the intake silencer.
14
Pre-drill drain hole no larger than 8mm in the
centreline underneath location as pictured.
Place the DVS air filter connector to the
carburettor inside the intake muffler. You will
find a groove in the sleeve, necessary to fix
properly the rubber boot to the plastic silencer.
15
Check that the rubber boot is fixed properly to
the intake silencer. Incorrect installation may
cause a loss of the intake silencer itself.
16
Flat Plier
Fasten the intake silencer previously assembled
to the carburettor by using the specific metal
clamp supplied.
Secure intake silencer from rotating with zip
ties linked to the chassis or by adapting a
bracket. (not supplied)
WWW.PATRIZICORSE.COM