- 7 -
- 6 -
T
he
vip w
aRRanTy
We build products based on our commitment to your absolute satisfaction.
That’s why Vortex tripods are unconditionally guaranteed and we make
this Very Important Promise to you—a Very Important Person.
Rest assured that in the event your Ridgeview becomes damaged or is
defective, Vortex Optics will repair or replace it at no charge to you. If
we cannot repair your tripod, we will replace it with a tripod in perfect
working order and equal or better physical condition. Call Vortex Optics
at 800-426-0048 for prompt, professional, and friendly service.
Vortex Optics
2120 West Greenview Drive
Middleton, WI 53562
[email protected]
Visit www.vortexoptics.com
for more information. Canadian customers
may visit www.vortexcanada.net for customer service information.
Note:
The VIP warranty does not cover loss, theft, or deliberate
damage to the product.
Adjusting the Tripod Legs
The Ridgeview tripod features sturdy anodized legs for reliable performance.
Padded upper sections on two legs make it comfortable to grip and carry.
Center Column
To gain additional height, raise the center column to the desired height.
Rotate the center column collar in a counter-clockwise direction, adjust,
and rotate in a clockwise direction to secure in place.
Note:
To view as low
as possible, raise the center column and position legs at the greatest possible
angle. Stabilize the tripod in windy conditions by hanging a counterweight
(not supplied) from the retractable balance hook.
Leg Angle
You can adjust each leg angle to one of three positions. As you lower the leg
back down, you can secure the leg at one of two angles.
Leg Length
Each tripod leg has four sections. Unlock the flip lever to slide adjustable leg
sections to the desired length, then press the flip lever back down to lock
each section in place.
1. Pull the leg
release out.
2. Lift the leg upward to
the preferred angle.
3. Push the leg release
back down to secure.
unlimited
unconditional
Lifetime Warranty
