VORON 1.8, Инструкция по сборке

Страница: 7 / 161

7
WWW.VORONDESIGN.COM HARDWARE
HEAT SET INSERT
Heat inserts with a soldering tip so that
they melt the plastic when installed.
As the plastic cools, it solidifies around
the knurls and ridges on the insert for
excellent resistance to both torque and
pull-out.
F695 BEARING
A ball bearing with a flange used in
various gantry locations.
LM8LUU BEARING
A long linear ball bearing used in the Z
axis.
THUMB NUT
Used in the print bed both for manual
tramming and as a spacer.
DIN 466-B
SELF TAPPING SCREW
Fastener with a pronounced thread
profile that is screwed directly into
plastic.