20
English
Unit is not plugged in. Plug Power Cord into electrical outlet.
Household circuit breaker / ground fault interrupter has tripped or
blown a fuse. Reset circuit breaker / ground fault interrupter, or replace
fuse (See TIPS).
The unit has overheated. Automatic Safety Shut-Off has initiated (See
RESETTING YOUR VORNADO HEATER).
Unit is damaged or in need of repair. Cease usage and unplug.
Contact Consumer Service for assistance.
Ensure unit is set to High Heat and thermostat is set to highest
Temperature setting.
Close all doors and windows to contain heat.
Allow the unit to fully circulate the heat throughout the room, may take
several minutes.
Unit fails to
power on.
Unit is not
producing
sufficient
amount of heat.
Troubleshoot
