20
English
Unit is not plugged in. Plug Power Cord into electrical outlet.
Household circuit breaker / ground fault interrupter has tripped or
blown a fuse. Reset circuit breaker / ground fault interrupter, or replace
fuse (See IMPORTANT SAFETY INSTRUCTIONS).
The unit has overheated. Automatic Safety Shut-Off has initiated (See
RESETTING YOUR VORNADO HEATER).
Unit is damaged or in need of repair. Cease usage and unplug.
Contact Consumer Service for assistance.
Check to see if the unit is locked. If lock icon is lit, hold down on icon
(for 3 seconds) until the light turns off. If the unit is unlocked and still
does not power off, unplug unit and contact consumer service.
Ensure unit is set to High Heat and thermostat is set to highest
temperature setting.
Close all doors and windows to contain heat.
Unit fails to
power on.
Unit fails to
power off.
Unit is not
producing
sufficient
amount of heat.
Troubleshoot
